Meta M99T2 Exchange/Re-program

Product Information

Re-program or exchange a Meta a M99T2 Alarm system with two new fobs & new codecard.

Either send in your old alarm for re-programming or purchase an exchange unit for immediate delivery. All exchange/re-programmed M99T2 brains are supplied with two coded round fobs, a codecard and user instructions. Simply locate the alarm usually hidden somewhere under the dash of the vehicle, unplug and send it to us for re-coding. The recoded alarm will be sent back via Royal Mail Next Day Special Delivery, in most cases we offer a 48 hour turn around (providing we receive the alarm via a next day delivery service, excluding w/ends)

If a re-program is required please choose the mail order option on the checkout page and send a copy of the receipt with your alarm to:

Abacus Car Alarms,
206 Leigham Court Road,
London,
SW16 2RB

 Once the alarm has been programmed and tested on our bench we will contact you for your payment details. Should you choose to pay via card payment will not be taken until alarm has been re-programmed & fully tested etc. and ready to send back to you. For exchange alarms simply order and pay for the unit via the 'Add To Basket' button below. Please do not forget to send old alarm back to us as failure to do so will result in a £50 charge. The buyer is responsible for all return shipping charges & for any losses in the mail while returning old alarm brains. The exchange is offered only for units that are fully functioning & in serviceeable condition, minor faults such as sticking indicator lights or no siren output are accepted for exchange. Burnt out or water damaged units will not be accepted for this exchange service. 

Please be sure to order the same alarm as you have fitted as the M99T & M99T2 alarms are not interchangeable.

If your vehicle also has the Meta M36T immobiliser fitted please contact the office before ordering.

Locating the Alarm ECU on factory fitted systems:

Alfa Romeo GTV:  On the drivers side locate and remove a small screw in the carpet cover of the centre console, remove the cover, and you should see the M99 alarm brain located somewhere under the stereo unit, pull out the alarm (sometimes it may be easier to do this from the passenger side - same method of removing the carpet cover) remove the plugs and send it to me at the address below. Without the alarm the car will still start and run as normal. Once reprogrammed simply plug the alarm in which will start working immediately. More Info

Fiat Coupe:  The alarm is located behind the fuse box located in the drivers footwell. Pull the fusebox down as far as it will go (it is mounted on stiff hinges - for more info see owners manual), using a torch locate the alarm which is simply pushed up where all the fusebox wires disappear, gently pull it down and unplug the unit and send it to me at the address below. More Info

VX220 & Lotus Ellise: The alarm is located on the passenger (near side) under the top dash cover, More info.

Price: £99.00

• Tell a Friend
• Back To Catagory

• Ask a Question