Change Currency: GBP

Autowatch 225320 two button fob

£50.00

Manufacturer: Autowatch

Stock Level: 9

Product Information

Autowatch 2 button self coding remote fob. Works with the blue range of alarms & all self coding single button & dual button controlled alarms, two button version of the 225000 fob, also replaces the earlier 225212 fob. Smaller button may have no function on some alarm models. Supplied with programming instructions and batteries. This remote will also work with the Piranha THM800 & THM400 and Maystar SC1 alarm systems & Microscan AN550 alarm.

Will work with the following (the smaller button may have no function on various models) 160, 161, 172, 186, 188, 345 & 346 range of alarms
You will need a 5 digit code to program the remote into the alarm, if you do not have the code, locate the alarm brain (usually hidden somewhere under the dash) & remove the outer protecting case (if fitted) by unscrewing the four screws in each corner (which some times can be hidden by plastic inserts), once the cover is removed locate the sticker which is usually found on the plastic surround of the smaller of the two large wiring plugs. On the sticker is the five digit code, the model number and a date code. If the code is 3 or 6 digits long please contact the office.

Locating the override code:

Override Code

To check if you have the correct code for programming follow these instructions:

  1. wait for the alarm to immobilise itself – IE the LED flashes slowly
  2. Turn the ignition on the LED will be constantly on,
  3. Turn the ignition off, the LED will now flash, count the flashes for the first number in the override code. For example if the first number is 3, count three flashes of the LED. When the LED has flashed the amount of times that corresponds to the first number of the code turn the ignition switch on.
  4. Turn off the ignition and count the flashes for the next number of the code and so on until all the numbers in the override code have been entered.
  5. If the code has been recognised the LED will flash very quickly for a few seconds, you are now in programming mode and the alarm is also disarmed.
  6. If the LED has not flashed quickly - start again from the beginning.
If the number is ‘0’ count 10 flashes of the LED.
 
FAQ
 Question Answer
can you tell me how to connect it to my alarm please  All information about Autowatch fobs & programming instructions can be found here
   
   

 

Supplied with programming instructions & a guide of how to locate the alarm unit to retrieve the code

Product Code: 225320

 

© Copyright Abacus Car Alarms 2018

eCommerce by CubeCart