Change Currency: GBP

Meta Boot Release Kit


Manufacturer: Meta

Stock Level: 1

Product Information

Meta M327 remote boot release kit for all meta alarms supplied with the single button fobs such as TVR vehicles. This kit will enable the use of a single fob to control the locking/unlocking & remote operation of the boot, assuming the vehicle is fitted with an electronic boot release button. Can also be used with the aftermarket boot release kit here. This system will be coded to the same 16 digit code the original alarm is programmed with, once the kit has been installed into your vehicle simply program the fob into the original alarm, once coded this fob will add the boot release function including the operation of arming & disarming the alarm (which includes locking/unlocking the doors - if remote CDL is fitted)

Meta M2503 Three Button Fob

Kit is supplied with control module one three button remote fob & relay. Wiring is a simple three wire job (+12V, earth & output to the supplied power relay).

Please note a working fob is required to code this kit into the car alarm control unit. For more information about all Meta remote fobs click here, if the code is not available please contact the office as the alarm ECU could be re-programmed with a new code and replacement fobs (later models only) - more info. If in any doubt please contact the office. 

Meta Code Card showing alarm code & positions

For eight digit coded fobs (numbers ending with TC1B) click here

The 16 digit code is made up of numbers & letters which can only be: A,B,C,D,E & F, any other letters are not allowed and the code will be incorrect (known as a hexadecimal number). The 1 to 7 numbers refer to the available positions allowed for the remotes to be programmed, which means the alarm can be programmed with up to 7 remotes. Be care full when reading the code, Meta use a very poor font which makes it difficult to distinguish between the letter B and the number 8 and the letter D and the number 0. If in doubt try scanning the card at a high resolution and enlarging the image using your regular paint program.

Click Here For Programming Instructions

Please add the 16 digit code number to the comments box at checkout.

 Complete with programming instructions  

 Please Note this fob is designed to work with UK/Ireland supplied  Meta Alarm systems which use the 433Mhz frequency for communication between fobs and alarm systems, as such may not work with equivalent devices supplied to other parts of the World, we offer no guarantee that they will work with these products. This remote fob will not work with Meta devices supplied to either Belgium or Holland unless the alarm frequency is 433Mhz. We offer no refund should the remote fobs not function correctly with non UK/Ireland supplied alarm systems you buy at your own risk. If you are unsure about the frequency of your alarm system locate the alarm control unit (usually hidden somewhere under the dash) where on most boxes will be a sticker with the frequency printed (see photo below)





Please add the 16 digit code number to the comments box at checkout.

Product Code: Meta M327


© Copyright Abacus Car Alarms 2019

eCommerce by CubeCart